dmesg - Intel Celeron E3200

Return To Intel Celeron E3200 System Information

microcode: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-16-generic (buildd@lcy01-07) (gcc version 5.2.1 20151003 (Ubuntu 5.2.1-21ubuntu2) ) #19-Ubuntu SMP Thu Oct 8 15:35:06 UTC 2015 (Ubuntu 4.2.0-16.19-generic 4.2.3)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 0x240 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003f69ffff] usable
BIOS-e820: [mem 0x000000003f6a0000-0x000000003f6adfff] ACPI data
BIOS-e820: [mem 0x000000003f6ae000-0x000000003f6effff] ACPI NVS
BIOS-e820: [mem 0x000000003f6f0000-0x000000003f6fdfff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: CCE G31T-M7/G31T-M7, BIOS 080014  04/07/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3f6a0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 03F700000 mask FFFF00000 uncachable
  2 base 03F800000 mask FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
total RAM covered: 1015M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
BRK [0x01ff1000, 0x01ff1fff] PGTABLE
BRK [0x01ff2000, 0x01ff2fff] PGTABLE
init_memory_mapping: [mem 0x3f400000-0x3f5fffff]
 [mem 0x3f400000-0x3f5fffff] page 2M
init_memory_mapping: [mem 0x20000000-0x3f3fffff]
 [mem 0x20000000-0x3f3fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x3f600000-0x3f69ffff]
 [mem 0x3f600000-0x3f69ffff] page 4k
BRK [0x01ff3000, 0x01ff3fff] PGTABLE
RAMDISK: [mem 0x33fb0000-0x35fcffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9E50 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000003F6A0000 000040 (v01 040710 RSDT2039 20100407 MSFT 00000097)
ACPI: FACP 0x000000003F6A0200 000084 (v01 040710 FACP2039 20100407 MSFT 00000097)
ACPI: DSDT 0x000000003F6A0440 005ED4 (v01 1AAAA  1AAAA000 00000000 INTL 20051117)
ACPI: FACS 0x000000003F6AE000 000040
ACPI: APIC 0x000000003F6A0390 00006C (v01 040710 APIC2039 20100407 MSFT 00000097)
ACPI: MCFG 0x000000003F6A0400 00003C (v01 040710 OEMMCFG  20100407 MSFT 00000097)
ACPI: OEMB 0x000000003F6AE040 000072 (v01 040710 OEMB2039 20100407 MSFT 00000097)
ACPI: HPET 0x000000003F6A6320 000038 (v01 040710 OEMHPET  20100407 MSFT 00000097)
ACPI: GSCI 0x000000003F6AE0C0 002024 (v01 040710 GMCHSCI  20100407 MSFT 00000097)
ACPI: SSDT 0x000000003F6B0A10 000A7C (v01 DpgPmm CpuPm    00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000003f69ffff]
NODE_DATA(0) allocated [mem 0x3f69b000-0x3f69ffff]
 [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003de00000-ffff88003edfffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x000000003f69ffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000003f69ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000003f69ffff]
On node 0 totalpages: 259646
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 3995 pages used for memmap
  DMA32 zone: 255648 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x40000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88003f400000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 255566
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 972076K/1038584K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 66508K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.750 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.50 BogoMIPS (lpj=9575000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
ftrace: allocating 30905 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU        E3200  @ 2.40GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
microcode: CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9575.00 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x3f6ae000-0x3f6effff] (270336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 12:10:08, date: 11/19/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88003D10DC00 000277 (v01 DpgPmm P001Ist  00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88003D10E000 000277 (v01 DpgPmm P002Ist  00000012 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x3f700000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfe980000-0xfe9fffff]
pci 0000:00:02.0: reg 0x14: [io  0xdc00-0xdc07]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xfe800000-0xfe8fffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe978000-0xfe97bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xd880-0xd89f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xd800-0xd81f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xd480-0xd49f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0xd400-0xd41f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe977c00-0xfe977fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0xd080-0xd087]
pci 0000:00:1f.2: reg 0x14: [io  0xd000-0xd003]
pci 0000:00:1f.2: reg 0x18: [io  0xcc00-0xcc07]
pci 0000:00:1f.2: reg 0x1c: [io  0xc880-0xc883]
pci 0000:00:1f.2: reg 0x20: [io  0xc800-0xc80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io  0xe800-0xe8ff]
pci 0000:01:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
pci 0000:01:00.0: reg 0x30: [mem 0xfeaf0000-0xfeafffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:02:01.0: [1814:0302] type 00 class 0x028000
pci 0000:02:01.0: reg 0x10: [mem 0xfebf8000-0xfebfffff]
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x3f700000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3f6a0000-0x3fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: [dma 3]
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:05: [io  0x0a00-0x0a0f] has been reserved
system 00:05: [io  0x0a10-0x0a1f] has been reserved
system 00:05: [io  0x0a20-0x0a2f] has been reserved
system 00:05: [io  0x0a30-0x0a3f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x0800-0x087f] could not be reserved
system 00:06: [io  0x0480-0x04bf] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0a: [mem 0x00100000-0x3f6fffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x3f700000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:02: resource 8 [mem 0x3f700000-0xdfffffff window]
pci_bus 0000:02: resource 9 [mem 0xf0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32896K (ffff880033fb0000 - ffff880035fd0000)
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa0b
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa0b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1447935007.760:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #32 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000400000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (30 C)
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel G33 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe977c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-16-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-16-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6a1c9c21f04ab86fd1d7ced6ca113540fc8e35b6'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 7:347:178
acpi device:0e: hash matches
 platform: hash matches
rtc_cmos 00:01: setting system clock to 2015-11-19 12:10:08 UTC (1447935008)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata4.01: NODEV after polling detection
ata3.00: ATA-8: WDC WD1600AAJS-00V4A0, 05.01D05, max UDMA/133
ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: ATAPI: SONY    DVD RW AD-7240S, 1.61, max UDMA/100
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 1D05 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            SONY     DVD RW AD-7240S  1.61 PQ: 0 ANSI: 5
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
random: systemd-udevd urandom read with 12 bits of entropy available
Floppy drive(s): fd0 is 1.44M
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0 eth0: RTL8102e at 0xffffc900001fe000, 00:25:11:b4:eb:3b, XID 04c00000 IRQ 25
[drm] Initialized drm 1.1.0 20060810
FDC 0 is a post-1991 82077
[drm] Memory usable by graphics device = 512M
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
r8169 0000:01:00.0 ens32: renamed from eth0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 2-1: new low-speed USB device number 2 using uhci_hcd
usb 2-1: New USB device found, idVendor=04f3, idProduct=0103
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:04F3:0103.0001/input/input5
hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.0-1/input0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:04F3:0103.0002/input/input6
usb 5-1: new low-speed USB device number 2 using uhci_hcd
hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.0-1/input1
usb 5-1: New USB device found, idVendor=093a, idProduct=2510
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB OPTICAL MOUSE
usb 5-1: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:093A:2510.0003/input/input7
hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.3-1/input0
tsc: Refined TSC clocksource calibration: 2393.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 227 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
clocksource: Switched to clocksource tsc
random: nonblocking pool is initialized
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Started Braille Device Support.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Reached target Slices.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[219]: Received request to flush runtime journal from PID 1
intel_rng: FWH not detected
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150619/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000847 (\_SB_.PCI0.SBRG.PMI1) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
leds_ss4200: no LED devices found
gpio_ich: GPIO from 462 to 511 on gpio_ich
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708BCE: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0:    dig-out=0x20/0x0
snd_hda_codec_via hdaudioC0D0:    inputs:
snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0:      Line=0x1b
snd_hda_codec_via hdaudioC0D0:      CD=0x1f
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
rt61pci 0000:02:01.0 wlp2s1: renamed from wlan0
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Adding 1037308k swap on /dev/sda5.  Priority:-1 extents:1 across:1037308k FS
audit: type=1400 audit(1447935015.774:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.774:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.786:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.786:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.786:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.786:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.858:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.858:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.858:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=438 comm="apparmor_parser"
audit: type=1400 audit(1447935015.858:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=438 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): wlp2s1: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
IPv6: ADDRCONF(NETDEV_UP): wlp2s1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): ens32: link is not ready
r8169 0000:01:00.0 ens32: link down
r8169 0000:01:00.0 ens32: link down
IPv6: ADDRCONF(NETDEV_UP): ens32: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s1: link is not ready
r8169 0000:01:00.0 ens32: link up
IPv6: ADDRCONF(NETDEV_CHANGE): ens32: link becomes ready
perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
audit_printk_skb: 75 callbacks suppressed
audit: type=1400 audit(1447935874.090:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23228 comm="apparmor_parser"
audit: type=1400 audit(1447935874.090:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=23228 comm="apparmor_parser"
audit: type=1400 audit(1447935874.098:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=23228 comm="apparmor_parser"
audit: type=1400 audit(1447935880.250:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=23356 comm="apparmor_parser"
audit: type=1400 audit(1447935903.634:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=23872 comm="apparmor_parser"
audit: type=1400 audit(1447935903.634:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=23872 comm="apparmor_parser"
audit: type=1400 audit(1447935903.638:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=23872 comm="apparmor_parser"
audit: type=1400 audit(1447935903.638:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=23872 comm="apparmor_parser"
audit: type=1400 audit(1447935903.738:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=23871 comm="apparmor_parser"
audit: type=1400 audit(1447935903.754:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=23871 comm="apparmor_parser"
audit: type=1400 audit(1447935904.710:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=23876 comm="apparmor_parser"
audit: type=1400 audit(1447935904.710:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=23876 comm="apparmor_parser"
audit: type=1400 audit(1447935904.726:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="pxgsettings" pid=23876 comm="apparmor_parser"
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 7865, nTxLock = 62924
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1   gen()  2865 MB/s
raid6: sse2x1   xor()  2697 MB/s
raid6: sse2x2   gen()  3082 MB/s
raid6: sse2x2   xor()  3304 MB/s
raid6: sse2x4   gen()  4906 MB/s
raid6: sse2x4   xor()  3777 MB/s
raid6: using algorithm sse2x4 gen() 4906 MB/s
raid6: .... xor() 3777 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse:  9818.000 MB/sec
   generic_sse:  4424.000 MB/sec
xor: using function: prefetch64-sse (9818.000 MB/sec)
Btrfs loaded
EXT4-fs (sda2): unable to read superblock
EXT4-fs (sda2): unable to read superblock
EXT4-fs (sda2): unable to read superblock
FAT-fs (sda2): bogus number of reserved sectors
FAT-fs (sda2): Can't find a valid FAT filesystem
XFS (sda2): Invalid superblock magic number
FAT-fs (sda2): bogus number of reserved sectors
FAT-fs (sda2): Can't find a valid FAT filesystem
MINIX-fs: unable to read superblock
attempt to access beyond end of device
sda2: rw=16, want=3, limit=2
hfsplus: unable to find HFS+ superblock
qnx4: no qnx4 filesystem (no root dir).
ufs: You didn't specify the type of your ufs filesystem
               
               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
               
               >>>WARNING>WARNING>WARNING>>WARNING

Return To Intel Celeron E3200 System Information